• We have great brands like Respironics, ResMed and more.
  • Call (855) 708-2727 now for more info about our products.
  • Helpful Link to assist with therapy and more.
  • Live Chat with one of our Customer Service Experts.

ResMed AirCurve™ 10 Card -to-Cloud CPAP Machine with HumidAir™

CA$2,450.88

AirCurve™ 10 VAuto Card-to-Cloud with HumidAir™

Includes ResMed AirCurve™10 VAuto Card-to-Cloud (C2C) bilevel machine with two pressure level settings: a higher pressure when you inhale, and a lower pressure that makes it easier to exhale. AirCurve 10 VAuto also includes built-in HumidAir™ humidifier and downloadable data via SD card included in device. Purchase does not include CPAP mask or replacement tub. Prescription required.
About AirCurve 10 VAuto Card-to-Cloud:

  • Auto-adjusting bilevel machine for obstructive sleep apnea, which means it changes airflow pressure levels for both inhalation and exhalation based on your needs
  • Allows your exhalation pressure to be set as low as 4 cm H2O for enhanced breathing comfort, regardless of how high the inhalation pressure is set (helpful if you require a higher pressure to treat your sleep apnea)
  • Built-in humidifier and Climate Control enhanced auto setting provide optimal breathing comfort
  • User-friendly controls and an intuitive interface make it simple to navigate settings and your nightly sleep report
  • Device data can be downloaded via included SD card to upload into AirView™ or ResScan™ 

About the HumidAir heated humidifier:

  • Humidification is designed to provide comfortable therapy, while preventing dry mouth and congestion
  • Includes standard tub
  • Climate Control auto setting controls the humidifier
  • Personalize your settings to find the level of humidity that’s most comfortable for you
  • Optional cleanable replacement tub can be used in place of the standard HumidAir tub

ResMed is temporarily adding C2C devices to our fleet for sleep and respiratory care devices:

1

To serve the constantly growing backlog of patients waiting to start therapy, or to replace a device that is at the end of its design life, we’re temporarily adding C2C (Card-to-Cloud) PAP devices to our fleet of connected sleep and respiratory care devices.

2

We remain committed to our connected health strategy and continue to invest in innovating our digital solutions today.

3

Adding C2C devices to our portfolio of offerings is a temporary decision, specifically aimed at alleviating the unmet needs of hundreds of thousands of patients worldwide waiting for ResMed PAP therapy while CAM (Communications Access Module) supply remains constrained.

4

This guidebook will help coach you on how to seamlessly integrate C2C PAP devices into your fleet to setup on new patients.


Things to consider with patients using Air10 C2C devices

When it comes to patients on Air10 C2C devices, we recommend setting clear expectations early on. Below are a few things to consider with C2C patients:

When you order the ResMed AirCurve™ 10 Card-to-Cloud you get

Air10 with HumidAir™

About AirCurve 10 S:

  • A fixed-pressure bilevel machine for obstructive sleep apnea, which means it delivers one consistent pressure for inhalation and another for exhalation that is set by your doctor.
  • Allows your exhalation pressure to be set as low as 4 cm H2O for enhanced breathing comfort, regardless of how high the inhalation pressure is set. This can be helpful if you require a higher pressure to treat your sleep apnea.
  • Built-in humidifier and Climate Control’s enhanced Auto setting provide optimal breathing comfort.
  • User-friendly controls and an intuitive interface make it simple to navigate settings and your nightly sleep report.
  • Connects to myAir™, an online support program and app that automatically sends your therapy data to your computer or smartphone.
  • Prescription required.

SlimLine™ Tubing

ResMed SlimLine™ tube
Includes ResMed SlimLine™ CPAP tube. This purchase does not include CPAP machine system.


About SlimLine heated tubing:

  • SlimLine tube is lighter, thinner and takes up less space than traditional tubing
  • Compatible with ResMed Air10™ and S9™ machines

SD Card

(Inserted before shipping)

SD Card Envelope

(Allows for easier tracking of SD cards)

C2C addendum

(Included with User Guide)


C2C FAQs

  1. What is C2C?

C2C, or Card-to-Cloud, refers to the ability of healthcare providers to access patient therapy and usage data via the device’s SD card. While all ResMed devices capture and safely store patient nightly usage data, Air10™ C2C devices cannot relay data directly to the cloud. However, there are steps that can be taken so the data is available for the patient and clinician. Clinicians can use AirView™ to log patient data using the Air10 C2C devices by manually downloading the data off the patient’s SD card, located on the side of the Air10 C2C device.

 

  1. Why is ResMed offering C2C devices?

To serve the constantly growing backlog of patients waiting to start therapy or to replace a device that is at the end of its design life, we’re temporarily adding C2C PAP devices to our fleet of connected sleep and respiratory care devices.

Adding C2C devices to our portfolio of offerings is a temporary decision specifically aimed at alleviating the unmet needs of hundreds of thousands of patients worldwide waiting for ResMed PAP therapy while CAM (Communications Access Module) supply remains constrained.  We remain committed to our connected health strategy and continue to invest in innovating our digital solutions today.

 

  1. How can I tell the difference between a connected Air10 device and an Air10 C2C device?

There are a few ways to identify if you have an Air10 C2C device.

 

A. Refer to the home screen when the device is powered on.

For Air10 CAM devices, there is a symbol in the top-right corner of the user interface (circled below) which identifies the cellular connection, as shown in image 1 and image 3.

For an Air10 C2C device this symbol will not appear on the User Interface, as shown in image 2 and image 4.

B. Refer to the product labeling on the back of the device.

A connected Air10 device label on the back of the device contains only serial number information (example shown below):

An Air10 C2C device label on the back of the device will contain serial number information as well as two or three symbols (depending on your device type).

For AirSense™ 10 AutoSet™, and AirCurve™ 10 VAuto, ASV and ST C2C models, the label will appear with two additional symbols (example below on this device label):

For the AirCurve 10 ST-A C2C model, the label will appear with three additional symbols (example below on this device label):

More Information
availibility out of stock
Quantity No
Aircraft Use N/A
Mask Type N/A
Manufacturer ResMed
Brand Resmed
Dimensions 4.57" x 10.04" x 5.91"
Prescription Required Yes
Data Card No
Passover Cool Humidifier No
Ramp between 5 to 45 minutes
Altitude Adjustment N/A
Heated Humidifier No
Warranty 2 years
Features N/A
Pressure Range No
Maximum Pressure 30 cm H2 O (30 hPa) for more than 6 sec or 40 cm H2 O (40 hPa) for more than 1 sec.
Operating Environment +41°F to +95°F (+5°C to +35°C)
Operating Altitude Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
Operating Range 4 to 20 cm H2 O (4 to 20 hPa)
Storage Environment Storage and transport temperature: -4°F to +140°F (-20°C to +60°C)
Storage and transport humidity: 5 to 95% relative humidity, non-condensing
Sound Level N/A
Noise Level N/A
Flow Type N/A
Flow Type ±6 L/min or 10% of reading, whichever is greater, at 0 to 150 L/min positive flow
Exhalation Relief No
Mask Off Alert No
Included In Box Device with HumidAir™ integrated humidifier <br/> Water tub <br/> Air tubing <br/> Power supply unit <br/> Travel bag <br/> SD card (not available in all devices).
Software Available No
Machine Type N/A
Voltage No
Humidifier Type No
Can Use A Battery No
Power Supply Type N/A
Integrated Battery N/A
Battery Charger N/A
Battery Weight N/A
Battery Duration N/A
AC Input Range 100–240V, 50–60Hz 1.0–1.5A, Class II 115V, 400Hz 1.5A, Class II (nominal for aircraft use)
220 Voltage No
CPAP 110 Voltage No
DC Output 24V___ 3.75A
Power Requirements 90W
Other Information N/A
GTIN N/A
Automatic On/Off No
PreviousBvin N/A
Reference Only No
Parts & Supplies No
Type N/A
Tube Option N/A
Set Up Pack N/A
Optional Features N/A
HCPCS Reimbursement Code N/A
Weight 2.750000
  • Manufacturer:ResMed
  • Brand:Resmed
  • Dimensions:4.57" x 10.04" x 5.91"
  • Product Finder Type:Machines
  • Product Finder Brand:RESMED
  • Prescription Required:Yes
  • Ramp: between 5 to 45 minutes
  • Warranty:2 years
  • Maximum Pressure:30 cm H2 O (30 hPa) for more than 6 sec or 40 cm H2 O (40 hPa) for more than 1 sec.
  • Operating Environment:+41°F to +95°F (+5°C to +35°C)
  • Operating Altitude:Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
  • Operating Range:4 to 20 cm H2 O (4 to 20 hPa)
  • Storage Environment:Storage and transport temperature: -4°F to +140°F (-20°C to +60°C)
    Storage and transport humidity: 5 to 95% relative humidity, non-condensing
  • Sound Level:25 dBA with uncertainty of 2 dBA
  • Flow Type:±6 L/min or 10% of reading, whichever is greater, at 0 to 150 L/min positive flow
  • Included In Box:Device with HumidAir™ integrated humidifier
    Water tub
    Air tubing
    Power supply unit
    Travel bag
    SD card (not available in all devices).
  • AC Input Range:100–240V, 50–60Hz 1.0–1.5A, Class II 115V, 400Hz 1.5A, Class II (nominal for aircraft use)
  • DC Output:24V___ 3.75A
  • Power Requirements:90W
  • Average Power Consumption:53W (57VA)
  • Weight:2.750000
Media

Shipping Information

Standard shipping is our default shipping method. Under this option we will use either United Parcel Service (UPS) or USPS (United States Post Office) to ship your package. We will make this determination based on speed and cost effectiveness. Shipping costs will be determined based on the total cost of your order. To calculate your shipping, add your item(s) to your shopping cart and use the box marked "Estimate Shipping and Tax".

Please note: Your package will be shipped from our warehouse in the US. We find that we can offer a larger selection of products by shipping directly from the United States, and while we do have offices in Canada, all customer packages will leave from the US warehouse. Because of this, shipment times can vary widely. It generally only takes a few days for the package to reach Canada, but depending on the office at which it arrives, time spent in Customs can be anywhere from 2-4 weeks. 

Also, customs officers make a determination as to whether or package should be assessed import duties. We mark every Canadian package as "Personal Medical Supplies" to discourage assessment of these duties. But, if duties are assessed at your Customs office, we cannot be held responsible for those costs. These are not included in your shipping or product charges. Should duties be assessed unfairly, we can provide you with an appeal form that may help in getting your duty charges back.

When will my order be shipped?

Most orders placed before 3:30pm EST/EDT Monday through Friday will be shipped within 1-3 business days. Customers with orders that will take longer to ship will be informed via email or telephone. We make every effort to ship our packages as soon as the order and prescription are received, but certain items may take longer. You will be notified as soon as your order ships via email. We will include any tracking information available.

To help expedite your order shipment, please be sure to promptly send in any required prescriptions for purchased CPAP masks or machines. These will be necessary to process and ship your order quickly.

Our Prescription Policy

If your order includes CPAP masks, machines or heated humidifiers, we must have your prescription on file before we can ship your order. Please note that CPAP supplies and parts such as filters, tubing, water chambers, mask parts, cushions and pillows do not require a prescription.

There are three easy ways to give us your CPAP prescription:

  • Fax your prescription to us: (855)505-9178.
  • Email your prescription to prescriptions@canadacpapsupply.com.
  • We can request your prescription for you! Contact customer service at (855)708-2727 or download and print this Physician's RX Order Form document that will allow you to easily and quickly request a prescription from your doctor. Download the form, send it to your doctor, allow him to complete it, and then send it back to us!

NOTE: If you fax or email a prescription, please write your order number on your prescription. A prescription for a standard CPAP must include a set pressure setting.

Please contact our customer service team directly if you are having trouble obtaining a prescription for your mask, machine or humidifier. We can help!

We found other products you might like!